ADLINK PCI-72507251 Driver
PCI, PCI Express, PXI, CompactPCI, PC/+, and ISA, ADLINK's data acquisition modules embrace more Supports a Bit 5 V PCI bus (PCI/). cPCI and PCI/ are registered trademarks of ADLink Inc. Other product names mentioned herein are used for identification purposes only and. PCI/ □ DIND Terminal Board with One pin D-sub Connector and DIN-Rail Mounting (Cables are not included.) □ ACLD
|File Size:||19.6 MB|
|Supported systems:||Windows 2K, Windows XP, Windows Vista, Windows Vista 64 bit, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10|
|Price:||Free* (*Free Registration Required)|
ADLINK PCI-72507251 Driver
For cPCI, please get the software driver from X: Installation Each digital input channel and their corresponding jumper are shown in the following ADLINK PCI-72507251 2. Fig 2. The pin assignment of the D type connector is described by Figure 2. DIn- digital input low, channel n input signal Is ADLINK PCI-72507251 polarity sensitive 2.
PCI/, LPCI, LPCIe, cPCI
NC n - ADLINK PCI-72507251 close pin of relay n 3. NO n - normal open pin of relay n 4. COM n - common pin of relay n 5.
DIn -digital input channel n 2. DInH -digital input channel n with positive polarity 3.
DInL -digital input channel n with negative polarity 5. NC n -normal close pin of relay n 6. NO n -normal open pin of ADLINK PCI-72507251 n 7. COM n -common pin of relay n12 Installation2. Therefore, the PCI can control up to 32 relays and sense 32 isolation signals. Figure 2.
ADLINK TECHNOLOGY CPCI MANUAL Pdf Download.
In addition, the existance of the PCI expansion boards can be detected. Refer to the section 4. There are three types of registers on the PCIX: It is not necessary for users to understand the details of the ADLINK PCI-72507251 if you use the software library.
ADLINK PCI-72507251 The assigned address is located at offset 14h of PCR. The assigned base address is located at offset 18h of PCR.
Note that the PCIX registers are all 16 bits. Register Format Table 3. If the expansion PCI boards is not installed, the corresponding registers are not used ADLINK PCI-72507251 meanningless.
Each relay are controlled by one bits of the control register. The bit value 0 means the relay is not excited. The normal open signal line is open with the common line and the normal closed signal line is connected with the common line. The bit value 1 means ADLINK PCI-72507251 relay is excited and the normal open signal line is now closed, and vise versa.
The initial bits values of the control register are all 0. And the status of the relay can be readback from ADLINK PCI-72507251 readback register.
PCI-7250/7251, LPCI-7250, LPCIe-7250, cPCI-7252
If the relay is open, the corresponding bit value is 0. If the relay is closed, the bit value ADLINK PCI-72507251 1. The status of the 8 channels can be read from the isolation input register. Each bit is corresponding to each channel. As the DI status are controlled by one bits of the control register. The bit value 1 means input voltage is high and 0 menas input voltage is low. Data ADLINK PCI-72507251 Relay Output: Input Note: Form C and Form A.