HAMA 3-Way USB 2.0 Hub Driver
1 x Hama 7 Port USB Hub , 1 x power supply We deliver next business day to major centres within Gauteng and between Unboxing of HAMA USB Hub (7 USB Ports) This Usb Hub comes with a charger and has actually 4. >power is supplied via the usb port Hub/Switch. Router . 3 stars usb standard usb usb Adapter. "type c, c plug - micro b socket" black.
|File Size:||16.5 MB|
|Supported systems:||Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit|
|Price:||Free* (*Free Registration Required)|
HAMA 3-Way USB 2.0 Hub Driver
It is bus-powered hub, but it is very cheap and small and works after a small modding: Now there is common contacts: Tested on my Raspberry Pi.
Hama 4 Way USB Hub Port Bus Powered Small PC Laptop Computer Black eBay
Anker 7 Port USB 3. Input is a USB 3.
This hub uses an external 12V switching type power supply. It does not function as a bus powered hub. The hub does not backpower the Raspberry Pi, and appears to have complete isolation on the 5V lines between the input port and output ports.
The 7th port is a BC 1. The manual status up to 2 A can be supplied on the charge port, when no other devices are connected.
With the hub powered and no devices connected, I measured the following voltages on the charge port: With power applied and no devices connected, I measure the following voltages on the ports: P0 input 0V, P1 5. Has been powering a Model HAMA 3-Way USB 2.0 Hub fine, have not yest tested heavily with USB devices.
This is a 4-port switching hub that enables the "sharing" of up to four USB devices between two computers. Whilst it may be powered externally, it does take power from both connected computers. If one of them is, say, a netbook or laptop, that may provide sufficient extra power to enable the use of USB devices HAMA 3-Way USB 2.0 Hub the Pi alone cannot handle.
If you don't do both, boot-loops are likely to occur. Due to this hub back-feeding power, Model B rev 2 boards will occasionally crash with this hub connected every 24 hours for one user. Model B rev 1 HAMA 3-Way USB 2.0 Hub to be stable. Unlike my last hub, will power Wi-Fi! Tested with kernel 3.
Hama 32in1 Card Reader, USB & USB Hub, 3-way Hama DE
More testing to come. Was not able to record audio properly via a Soundblaster Play!
Tends to draw power from the Pi. USB Audio peripheral tested and working.
- Compatible USB Hubs
- Hama 3-Way Hub with Bluetooth Function, USB Drivers Download - Update Hama Software
- Hama USB Hub 4fach Weiß - Accessories eBay
- Hama USB 2.0 Hub 4fach Weiß - Accessories
- Hama USB 2.0 Hub 4 Way Port Bus-powered Small PC Laptop Computer Blue
- Hub USB, 7 port, USB 2.0, HAMA
There is a video showing this hub powering both the Raspberry Pi several peripherals at once . Internally two 4 Port switches linked.
|Toshiba Satellite Pro R850 Ricoh Card Reader||Navigation menu|
|Dell Dell 2707WFP||Recognized for best-in-class capabilities as an ISV (Independent Software Vendor)|
Also works while powering the Raspberry Pi. Shows in lsusb as two Genesys Logic, Inc.
There is a voltage problem on the left half of the hub 4 ports that do not deliver enough current to feed a wifi dongle tested with an RTLS ; you should not use these ports for anything important keyboard keys will stick, self-powered USB hard disk will reset continuously. HAMA 3-Way USB 2.0 Hub remaining 3 ports on the right half are instead working as expected. Without an external power supply it can run at least keyboard, mouse and USB dongle.
Does not work at all; tested with keyboard, mouse and one external USB-powered hard disk. May be this is the problem reported into known issues page. When connecting some HAMA 3-Way USB 2.0 Hub it kills the Ethernet with "smsc95xx Failed to read register index 0xX" errors.
Hama USB Hub 4 Way Port Bus-powered Small PC Laptop Computer Blue eBay
It did work for a keyboard and webcam. Bluetooth that works connected directly to the Raspberry Pi triggers the error. This one consists also of two 05e3: